Integra DTR-10.5 User Manual

 

37

 

• When connecting a VCR to the DTR-10.5, make connections for video and audio signals. Before making connec-

tions, refer to pages 32 and 33 for correct connections.

• This section shows the connection example when you use VIDEO 2 or VIDEO 3 as an input. In this case, you do not 

need additional configurations. When connecting to other terminals within the same terminal section on the 
DTR-10.5, configure the audio input assignment in the Audio Assign sub-menu (See page 94), the video input 
assignment in the Video Assign sub-menu (See page 95), the audio output assignment in the Audio Output Assign 
menu (See page 91), and the video output assignment in the Video Output Assign menu (See page 92).

• You can change the display name for the input source to represent the actual connected device (See page 97).
• For a model without a HDMI terminal, when you connect a VCR to the COMPONENT terminals, be sure to use the 

COMPONENT terminals to connect a TV or projector.

 

*For more information on the HDMI interface, see page 45.
*For more information on the i.LINK (AUDIO) interface, see page 42.

When connecting to other 
audio terminals within the 
same terminal section, config-
ure the audio input settings 
accordingly using the Audio 
Assign sub-menu (See page 
94).

When connecting to other audio termi-
nals within the same terminal section, 
configure the audio output settings 
accordingly using the Audio Output 
Assign sub-menu (See page 91).

When connecting to other 
video terminals within the 
same terminal section, config-
ure the video input settings 
accordingly using the Video 
Assign sub-menu (See page 
95).

When connecting to other video ter-
minals within the same terminal sec-
tion, configure the video output 
settings accordingly using the Video 
Output Assign sub-menu (See page 
92).