Integra DTR-10.5 User Manual

73

 

• To use Internet radio with the DTR-10.5, your broad-

band Internet connection needs to be up and running 
and able to access the Web. Please consult your ISP if 
you have any problems with your Internet connec-
tion.

• The DTR-10.5 uses DHCP and AutoIP to configure 

its network settings automatically. If you want to con-
figure these settings manually, see page 121.

• The DTR-10.5 does not support PPPoE settings, so if 

you have a PPPoE-type Internet connection, you must 
use a PPPoE-compatible router. 

• Depending on your ISP, you may need to specify a 

proxy server to use Internet radio. If your PC is con- 
figured to use a proxy server, use the same settings 
(see page 121).

To connect the DTR-10.5 to your Ethernet network, plug one end of a CAT5 Ethernet cable into the ETHERNET (Net- 
Tune) port, and plug the other end into a LAN port on your router or switch.
The following diagram shows how you can connect the DTR-10.5 to your Ethernet network. Here it’s connected to a 
LAN port on the router, which has a 4-port 100Base-TX switch built-in.
You can connect any number of DTR-10.5s to the network, and the Network Audio server can serve up to three clients 
simultaneously, so you can enjoy Net-Tune in three separate rooms simultaneously. The following diagram shows a Net- 
Tune network with two DTR-10.5s.