Integra DTR-10.5 User Manual

 

85

 Zone 2 Setup
    =====================
  
  0.Hardware Setup
  1.Speaker Setup
  2.Input Setup   
  3.Listening Mode Setup  
  4.Audio Adjust
  5.Preference

      

 Zone 2 Setup
    =====================
  
  0.Hardware Setup

  2.Input Setup   
  3.Listening Mode Setup  
  4.Audio Adjust
  5.Preference

      

 0.Hardware Setup
    =====================
  
  1.TV Format Setup
  
  

      

 1.Speaker Setup
    =====================
  
  1.Speaker Impedance
 

 2.Input Setup
    ==Input:XXXXXXXXX====
  
  1.Listening Mode Preset
 
  2.Delay
  

 4.Audio Adjust
    =====================
  
  1.Tone Control
  

  

 5.Preference
    =====================
  
  1.Volume Setup
  
  2.OSD Setup

  3.OSD Position

  

 3.Listening Mode Setup 
    =====================

   1.Mono Setup
   2.Multiplex Setup
   3.Stereo Setup
   4.Dolby Digital Setup
   5.DTS Setup
   6.AAC Setup
   7.Dolby Virtual
     Speaker Setup

The Zone 2 settings shown on this 
page can be made when you 
perform either of the following 
settings in the “MAIN A” setup 
menu.
• Under the “Speaker/Output 

Setup 

→ Speaker Configuration” 

menu, when you select the 
surround back setting to 
“Powered Zone 2.” (The main 
menu 1 below)

• Under the “Speaker/Output 

Setup 

→ Audio (Video) Output 

Assign” menu, when you select 
the output terminal setting to 
“Zone 2 Out.” (The main menu 2 
below)