JVC RX-530RBK User Manual

English

Page 28

6. Press Control

% / fi

fi until “–DELAY +” appears on the display.

7. Press Control

@ / #

# to adjust the delay time of the rear speaker output.

Each time you press the button, the delay time changes as follows:

DELAY 1

Select this when the distance from you to your rear speakers is greater than that to the
front speakers.

DELAY 2

Select this when the distance from you to your rear speakers is almost equal to that to
the front speakers.

DELAY 3

Select this when the distance from you to your rear speakers is less than that to the front
speakers.

Note:
When you have selected “3CHLOGIC,” you cannot adjust the delay time.

8. Press Control

% / fi

fi until “TEST” appears on the display, then press Control @

@ / #

# to start

checking the speaker output balance.
“TEST” starts flashing on the display, and a test tone comes out of the speakers in the following
order:

Notes:
• No test tone comes out of the rear speakers when you have selected “3CHLOGIC.”
• No test tone comes out of the center speaker when you select “PHANTOM” or “OFF” for the center

mode.

9. If necessary, adjust the speaker output balance as follows:

• To adjust the rear speaker output level, press Control

% / fi until “– REAR +” appears on the

display, then press Control

@ / #.

• To adjust the center speaker output level, press Control

% / fi until “–CENTER+” appears on the

display, then press Control

@ / #.

Notes:
• The sound levels of the left and right rear speakers will be the same.
• You cannot set the sound level of the rear speakers when you have selected “3CHLOGIC.”
• You cannot set the sound level of the center speaker when you select “PHANTOM” or “OFF” for the

center mode.

10. Press Control

% / fi

fi until “TEST” appears on the display, then press Control @

@ / #

# to stop the

test tone.

DELAY 1

DELAY 2

DELAY 3

Left front

speaker

Center

speaker

Rear

speakers

Right front

speaker

RX-530RBK(EF)_0021-001A_En

97.4.24, 0:31 PM