Kenwood KR-V8090 User Manual

KR-V9090/8090 (En/T)

This function allows you to pair the video signal input to the VIDEO 2 VIDEO jack with audio signals input to the 6CH.INPUT jacks.

   9

1 Set the INPUT SELECTOR to VIDEO 2.

2 Hold down the AUTO key for more than

• When the receiver is set to this mode, it functions as a multi-channel

amplifier (the surround effects (etc.) cannot be activated).

• The sound of the front channel is output from the SPEAKERS A only.
• The receiver switches to the multi-channel amplification mode auto-

matically whenever VIDEO 2 is selected.

• To undo this setting and listen to the audio signals input to the VIDEO

2 AUDIO jacks, repeat this procedure so that "M.INPUT" goes out.

ADPT ON

Appears for a few seconds after the adaptor input is
turned on.

• When the receiver is set to this mode, the audio signals are looped

through the graphic equalizer connected to the ADAPTOR OUT and IN
jacks on the rear panel.

9

• When the adaptor is on, the overall volume is slightly decreased.
• To undo this setting, repeat this procedure to display "ADPT OFF".

8

7

4

¢

6

-ON –OFF

−

Keys or controls used in this operation.

VIDEO2 

VIDEO2 

Lights