Insignia NS-STR514 User Manual

Insignia NS-STR514 Stereo Receiver with Bluetooth

www.insigniaproducts.com

Your receiver requires space for ventilation. For best 
performance: 
• Do not install your receiver in an enclosed area.
• Do not block the ventilation openings on your 

receiver.

• Do not place anything on top of your receiver.
• Make sure that you allow 8 in. (20 cm) of space 

around both sides and the back of your receiver 
and 16 in. (40 cm) above your receiver for correct 
ventilation.

1 Connect the indoor FM antenna (included) to 

the FM jack on the back of the receiver.

2 Move the antenna until you get the best 

reception of your favorite FM stations.

1 Assemble the AM antenna.

2 Press the GND and AM Loop levers, insert the 

ends of the wires, then release the levers. Make 
sure that only the bare, stripped wire is inserted 
in the jack.

3 Locate the AM antenna as far as possible from 

the receiver, TVs, speaker cords, and the AC 
power cord. Move the antenna until you get the 
best reception of your favorite AM stations.

Connect the AC cord only after the speakers, 
antenna, and all optional equipment have been 
connected. Never make or change any connections 
with the power turned on.

Be sure to observe the color coding when connecting 
audio and speaker cords.
Make connections firmly and correctly. Failure to do 
this can cause loss of sound, add noise to the sound, 
or damage your receiver.

8 in. 

(40 cm)

8 in. 

(20 cm)

16 in.

(20 cm)

Front view

Side view

Back of 
receiver

Back panel

To improve reception, you may use a 75 

Ω outdoor 

antenna instead of an indoor antenna. Disconnect 
the indoor antenna before replacing it with an 
outdoor antenna.

To improve reception, you may use an outdoor AM 
antenna instead of a loop AM antenna. Disconnect 
the indoor antenna before replacing it with an 
outdoor antenna.

Indoor AM antenna

Back panel

NS-STR514_14-0118_MAN_V1_ENG.book  Page 6  Thursday, March 6, 2014  10:53 AM