Panasonic H0608VC0 User Manual

RQT9223

You cannot assign one selector to the same type of two or more 

terminals. In this case, the selector set last becomes effective.

1.  To enter the SETUP (➔ page 36)
2.  Press [e][r] to select “IN ASSIGN ”, and 

3.  Press [e][r] to select the type of input 

HDMI3 (HDMI input 3), OPT1 (Optical input 1),  
OPT2 (Optical input 2), OPT3 (Optical input 3),  
COAX (Coaxial input), CMPV3 (Component Video input 3)
HDMI1, HDMI2, CMPV1 and CMPV2 are fixed to 

equipment beforehand and you cannot change the setting.

4.  Press [e][r] to select the selector to assign, 

Allocatable selector:
HDMI3 : CBL (Cable box/Satellite receiver), GAME
OPT1, OPT2, OPT3, COAX :  DVR (DVD recorder), BD P 

(Blu-ray Disc/DVD player)

CMPV3 : CBL, GAME, VCR
Factory setting: 
HDMI3 : CBL, OPT1 : DVR, OPT2 : BD P, OPT3 : TV, 
COAX : CD, CMPV3 : CBL 

5. To finish the setting (➔ page 36)

Set the positions for surround speakers during 7.1-channel 
virtual surround playback.

1.  To enter the SETUP (➔ page 36)
2.  Press [e][r] to select “7.1CH VS ”, and press 

3.  Press [e][r] to select setting, and press [OK] 

OFF : 

 When 7.1-channel surround playback 

effect is not used

SIDE SPK : 

 When the surround speakers are placed 

almost next to the listening-viewing position

REAR SPK :  

 When the surround speakers are placed at 

the back of the listening-viewing position

Factory setting : 

4.  To finish the setting (➔ page 36)

Selecting the use of wireless speakers as surround speakers or 
multi room speakers when connecting SH-FX67 (not included).

1.  To enter the SETUP (➔ page 36)
2.  Press [e][r] to select “WIRELESS ”, and 

3.  Press [e][r] to select the setting, and press 

MULTI ROOM :   When enjoying music in another room 

using the wireless speakers

SURR SPKR : 

 When using the wireless speakers as 

surround left and right speakers

Factory setting: 

4.  To finish the setting (➔ page 36)

• See page 27 for more details.

Most sources can be played with “

AUTO ” (factory setting).

However, in the following cases, change the input signal 
detection setting.
• When the beginning of the song is cut during playback of CD, 

set to “

PCM ” (PCM FIX).

• You can fix the signal type (digital, analog or PCM) supplied 

by such equipment as the DVD recorder and the Blu-ray Disc/
DVD player or make the unit identify the input signal type.

1.  To enter the SETUP (➔ page 36)
2.  Press [e][r] to select “INPUT MODE ”, 

3.  Press [e][r] to select a desired digital 

TV, CBL (Cable box/Satellite receiver), DVR (DVD 
recorder),

 BD P (Blu-ray Disc/DVD player), CD, GAME 

4.  Press [e][r] to select the method for 

AUTO :  Automatic detection (Taking priority in order of 

HDMI, OPTICAL, COAXIAL)

ANLG : Fixes the input signal to analog

DIG : Fixes the input signal to digital

PCM : PCM (from CDs) digital input fixed

Factory setting: 

5. To finish the setting (➔ page 36)

• When “

CBL ”, “GAME ”, “TV ” and “CD ” are not assigned to 

the digital terminal such as  HDMI, OPTICAL and COAXIAL 

(➔ left), only “

AUTO ” and “ANLG ” can be selected.

• “

DIGITAL INPUT” stays on the display when you fix the input 

signal as digital.

• “

PCM” always appears on the display when PCM FIX is set.

• “

PCM FIX ” flashes on the display when the unit is in the PCM 

FIX mode and a non-PCM source is input through digital 

connections (optical, coaxial).

Make this setting when you feel the volume of the equipment
connected to external terminals is low.

1.  To enter the SETUP (➔ page 36)
2.  Press [e][r] to select “AUX LEVEL ”, and 

3.  Press [e][r] to select the input level, and 

LEVEL LOW : Normal volume setting 
LEVEL HIGH : Setting when you want to raise the volume
Factory setting: 

•  Make this setting when you feel the volume of the 

equipment connected to external terminals is low.

4. To finish the setting (➔ page 36)

SA-BX500-PP (RQT9223-Y)_En.indd   39

6/27/2008   4:06:18 PM