Panasonic H0608VC0 User Manual

RQT9223

The equipment connected by the HDMI cable is not compatible with the unit’s copyright 

protection technology.

Should anything unusual happen using an HDMI connection:

Consult your dealer if the sign remains on the display after these steps.

•  Turn the connected equipment off and on again.

•  Pull out the HDMI cable then reinsert it.

•  Reduce the number of equipment connected in series to the HDMI terminal if exceeding 2 

units.

The unit has received a signal for a picture format that is incompatible with the HDMI connection. 

Check the settings of the connected equipment.

REMOTE 1
      or
REMOTE 2

Match the modes on the main unit and the remote control.

Muting is on.

Press [MUTING] on the remote control to cancel the function (➔ page 31).

Center and surround speakers are set as absent. Change their setting to present (➔ page 37).

Surround speakers are set as absent. Change their setting to present (➔ page 37).

Surround and surround back speakers are set as absent. Change their setting to present 

(➔ page 37).

Surround back speakers are set as absent. Change their setting to present (➔ page 37).

You are trying to use the effect unavailable for analog 8-channel playback.

You are trying to use the effect unavailable for the current input source.

PCM FIX
(flashing)

The unit is in the “PCM FIX” mode. Cancel this mode (➔ page 39).

“SPEAKERS A” is off. Select “SPEAKERS A”  (➔ page 26).

“SPEAKERS A” and “SPEAKERS B” are off. Select “SPEAKERS A” or “SPEAKERS B”  

(➔ pages 26 and 27).

Not compatible with this wireless system (➔ page 23).

SA-BX500-PP (RQT9223-Y)_En.indd   53

6/27/2008   4:06:48 PM