Panasonic RQT9223-Y User Manual
43
RQT9223
Remote contr
olling a
TV or D
VD recor
der etc.
Operations
ENTER
SUB MENU
S
TV/VIDEO
Remote controlling a DVD recorder
Aim the remote control at the
equipment you wish to operate.
equipment you wish to operate.
Do not forget to press this
before operating a DVD
recorder.
To switch the unit’s input to “DVD R. ”
To switch the remote control to the DVD
recorder operation mode
To switch the remote control to the DVD
recorder operation mode
To turn the DVD recorder on or off
To start playback
To skip a track or chapter
To search through the disc
To play in slow-motion
To show the direct navigator (or the top
menu)
menu)
To show a sub menu
To show the FUNCTIONS window (while
stopped)
stopped)
To return to the previous screen
To select an item
• Press to select after pressing [DIRECT NAVIGATOR,
TOP MENU], [SUB MENU], or [FUNCTIONS].
To confirm the selected item
To select a track or chapter directly
• Some of the models require you to press [OK] to
confirm after pressing numbered buttons.
To select a channel
• When you select a channel directly.
To pause
To move forward or backward frame by frame
To switch DVD recorder drives (HDD, DVD and
SD drive etc.)
SD drive etc.)
To select a channel
• When you make a selection in rising or falling order.
To stop playback
When operating a Panasonic DVD
recorder using the supplied remote
control
control
Change the control setting on the supplied
remote control to match the DVD
recorder’s remote control mode.
Confirm the DVD recorder’s remote control
mode in its operating instructions.
1. Press [DVD RECORDER].
2. Press and hold [OK] together with [1],
remote control to match the DVD
recorder’s remote control mode.
Confirm the DVD recorder’s remote control
mode in its operating instructions.
1. Press [DVD RECORDER].
2. Press and hold [OK] together with [1],
[2] or [3] for 2 seconds or longer.
• [Mode 1], [Mode 2], or [Mode 3] is set
on the remote control according to the
pressed button.
pressed button.
• The factory setting is [Mode 1].
When DVD recorder drives do not
switch
The condition may mean the DVD recorder
does not recognize the signal this unit’s
remote control transmits.
Switch the drives again after changing the
signal in the following procedure.
1. Press [DVD RECORDER].
2. Press and hold [OK] together with [8]
does not recognize the signal this unit’s
remote control transmits.
Switch the drives again after changing the
signal in the following procedure.
1. Press [DVD RECORDER].
2. Press and hold [OK] together with [8]
for 2 seconds or longer.
• To return: In step
2 above, press and
hold [OK] together with [9] for 2
seconds or longer.
seconds or longer.
Note
• When you operate a DVD recorder with
built-in VCR, press [DRIVE SELECT] to
select a choice other than VCR.
select a choice other than VCR.
SUB MENU
S
ENTER
SA-BX500-PP (RQT9223-Y)_En.indd 43
6/27/2008 4:06:26 PM