ONKYO tx-nr545 User Manual

Operating Other Components with the Remote Controller

You can control any other device than this unit by 

programming a specified remote control code to a 

REMOTE MODE button of the remote controller. Register 

a remote control code to a desired REMOTE MODE button 

and press it to enter the remote mode that allows you to 

operate the corresponding device.

¼

½

The RECEIVER and ZONE2 buttons cannot be programmed.

¼



You can search a remote control code and register it to a 

desired REMOTE MODE button in the unit's Setup menu.
1.  After pressing RECEIVER on the remote controller, 

press SETUP.

2.  With the cursors, select "7. Remote Controller" - 

"Remote Mode" and press ENTER.

3.  With the cursors, select the REMOTE MODE button 

for which you want to register a remote control code 

and press ENTER to display the subcategory selection 

screen.

4.  With the cursors, select the target subcategory, and then 

press ENTER to display the brand name input screen.

5.  Select a character with the cursors and press ENTER. 

Repeat it to enter the first three characters of the brand 

name.

6.  Select "Search" with the cursors and press ENTER.

● After a search is done, the list of possible brand 

names is displayed. If the brand name list is not 

displayed, select "Not Listed" with the cursors and 

press ENTER to return to the brand name input 

screen in step 5.

7.  With the cursors, select the target brand name, and then 

press ENTER.

● When the brand name is specified, the remote 

control code of the brand and how to register it will be 

displayed on the TV screen.

8.  Follow the guidance displayed on the TV screen.
9.  If the component can successfully be operated with its 

registered remote control code, select "OK" with the 

cursors and press ENTER.

● Only TV remote control codes can be entered for TV.

● Program a remote control code in accordance 

with the input since each button also works as the 

input selector. (For example, when the CD player 

is connected to the CD jack, program the remote 

control code for the CD player to CD)

● If the component cannot be operated, select "Try 

Next Code" with the cursors and press ENTER to 

display another code.