ONKYO tx-nr545 User Manual
Operating Other Components with the Remote Controller
En-47
CD player operation
Press the REMOTE MODE button programmed with
the remote control code for the relevant AV component
to switch the remote controller mode to that for the AV
component. Then, operate by using the corresponding
buttons. Available buttons vary depending on the product
category of the component. Operation may be incorrect or
impossible depending on the product.
4
3
1
REMOTE MODE
2
SOURCE
3
MUTING
4
DISC +/–
6
5
5
/ / / , ENTER
6
HOME
7
8
9
F
7
, , ,
,
,
,
8
SEARCH, REPEAT, RANDOM, MODE
9
Number 1 to 9, 0, +10
F
CLR, DISPLAY
Cassette tape deck operation
Press the REMOTE MODE button programmed with
the remote control code for the relevant AV component
to switch the remote controller mode to that for the AV
component. Then, operate by using the corresponding
buttons. Available buttons vary depending on the product
category of the component. Operation may be incorrect or
impossible depending on the product.
1
2
3
1
REMOTE MODE
2
SOURCE
3
MUTING
4
4
,
(Reverse Playback), ,
,
,
,
To operate CEC-compatible components
If this unit is connected via HDMI to a TV or BD/DVD
player, you may be able to control the devices using
the remote controller of this unit with CEC (Consumer
Electronics Control) linked operation.
TV: The TV button on the remote controller is
preprogrammed with remote control codes for linked
operation of some CEC(Consumer Electronics Control)-
compatible TV sets.
● If you cannot operate your CEC-compatible TV,
program one of the following remote control codes
(11807/13100/13500) to the TV button.
BD/DVD player: By registering a remote control code
(32910/33101/33501/31612) in the BD/DVD button, your
remote controller will be able to take advantage of linked
operation with CEC-compatible BD/DVD players.