ONKYO 29400095 User Guide

55

With the UP-A1 series Dock, you can easily play the 
music, photo, or movie stored on your Apple iPod 
through the AV receiver and enjoy great sound. You can 
use the AV receiver’s remote controller to operate your 
iPod.

Note:
Before using the UP-A1 series Dock, update your iPod 
with the latest software, available from the Apple Web 
site.

■ Adjusting the Adapter
The adapter needs to be adjusted to match your particu-
lar iPod. If there’s a gap between the back of your iPod 
and the adapter, turn the adapter counterclockwise to 
close the gap. Turning the adapter counterclockwise 
moves it forward. Turning it clockwise moves it back-
ward.

Notes:
• Make sure that the output level of the AV receiver is 

set to minimum.

• To prevent damage to the dock connector, don’t twist 

your iPod when inserting or removing it, and be care-
ful not to knock over the dock while your iPod is 
inserted.

• Do not take off your iPod from the Dock when you 

play back the music, photo, or movie stored on your 
iPod.

• Don’t use the UP-A1 with any other iPod accessories, 

such as FM transmitters and microphones, because 
they may cause a malfunction.

• It is recommended that you update your iPod software 

before using it with this unit. The updater for the iPod 
software is available at the Apple website.

■ Basic Operation
Note:
The AV receiver may take several seconds to startup, so 
you might not hear the first few seconds of the first song.

If you start iPod playback while the AV receiver is 
on Standby, the AV receiver will automatically turn 
on and select your iPod as the input source. Then, 
your iPod will start playback.

If you start iPod playback while listening to another 
input source, the AV receiver will automatically 
select your iPod as the input source.

You can use the AV receiver’s remote controller to 
control basic iPod functions.

For the latest information on the Dock, see the Onkyo 
Web site at: www.onkyo.com

Backward

Forward