ONKYO 29400021 User Manual

125

You’ll need to enter a code for each component that you 
want to control.

Note:
The remote control codes provided are correct at the time 
of printing, but are subject to change.

Look up the appropriate remote 
control code in the separate 
Remote Control Codes list.
The codes are organized by category 
(e.g., DVD player, TV, etc.).

(3 seconds)

While holding down the REMOTE 
MODE button to which you want 
to enter a code, press and hold 
down the [DISPLAY] button 
(about 3 seconds).
The REMOTE MODE button lights up.

Notes:
• Remote control codes cannot be 

entered for the [RECEIVER] and 
[ZONE] buttons.

• Only TV remote control codes can be 

entered for the [TV] button.

• Apart from the [RECEIVER], [TV], 

and [ZONE] buttons, remote control 
codes from any category can be 
entered for the REMOTE MODE 
buttons. However, these buttons also 
work as input selector buttons 
(page 60), so choose a REMOTE 
MODE button that corresponds with 
the input to which you connect your 
component. For example, if you con-
nect your CD player to the CD input, 
choose the [CD] button when enter-
ing its remote control code.

Within 30 seconds, use the num-
ber buttons to enter the 5-digit 
remote control code.
The REMOTE MODE button flashes 
twice.
If the remote control code is not entered 
successfully, the REMOTE MODE 
button will flash once slowly.

TX-NR807_En.book  Page 125  Tuesday, July 28, 2009  12:00 PM