ONKYO 29400021 User Manual

37

■ CD Player or Turntable (MM) with Built-in Phono Preamp

• With connection 

, you can listen to and record audio from your CD player or listen in Zone 2 or Zone 3.

• To connect the CD player digitally, use connection 

 or 

. (To record or listen in Zone 2 or Zone 3 as well, 

use  

and , 

or  

and .)

■ Turntable (MM) with no Phono Preamp Built-in 
The AV receiver’s PHONO IN is designed for use with a mov-
ing magnet (MM) type cartridge.
Use an analog audio cable to connect the AV receiver’s PHONO 
IN L/R jacks to the audio output on your turntable.

Notes:
• If your turntable has a ground wire, connect it to the AV 

receiver’s GND screw. With some turntables, connecting the 
ground wire may produce an audible hum. 
If this happens, disconnect it.

• If your turntable has a moving coil (MC) type cartridge, 

you’ll need a commercially available MC head amp or MC 
transformer. Connect your turntable to the head amp or trans-
former, and connect that to the AV receiver’s PHONO IN L/R 
jacks.

• You can also use a phono equalizer to connect a turntable 

with an MC-type cartridge. See your phono equalizer’s man-
ual for details.

CD IN L/R

⇐

Analog audio L/R output

DIGITAL COAXIAL IN 2 (VCR/DVR)

⇐

Digital coaxial output

DIGITAL OPTICAL IN 2 (CD)

⇐

Digital optical output

Step 1:
Choose a connection that matches your CD player (

, 

, or 

). Use connection 

 for a turntable with a built-in 

phono preamp.

When you use 
connection , 

you 

need to assign the 
digital audio input 
(see page 50).

TX-NR807_En.book  Page 37  Tuesday, July 28, 2009  12:00 PM