Sony CC-222 User Manual

4 – CD player—Repeat play

TASCAM CC-222 Owner’s Manual

Clear the program by pressing

PLAY MODE

until the

display shows

Continue

. The program is also

cleared when the disc tray is opened, and if the

STOP

key is pressed when playback is stopped in pro-
grammed order mode.

The programmed play order is not memorized when
power is turned off.

If an attempt is made to enter more than 25 program
steps, the message

PGM Full !

appears on the

display.

Repeat play

The unit can repeat the whole of the disc (or pro-
gram), an A–B portion set as described here, or the
current track only.

NOTE

Selecting the repeat mode is only possible using the
remote control unit. It is not possible to select the
repeat mode using the main unit alone.

The unit should be in playback, pause or stop
mode.

Continue to press the

REPEAT

key so that the

display shows

Repeat 1

(the

REPEAT 1

indicator lights) to repeat one track,

Repeat ALL

(the

REPEAT ALL

indicator

lights) to repeat the whole disc or program,

Repeat A-B

(the

REPEAT A-B

indicator

lights) to repeat between two points as
explained below.

If playback has not started, restart it.

To cancel repeat mode, press the

REPEAT

key so that

the display shows

Repeat OFF

and the

REPEAT

indicator goes out. Pressing

STOP

also cancels

repeat mode.

Setting the A and B repeat points

While the

REPEAT A-B

indicator is lit, you can set the

points between which playback should loop.

Start playback before the point where you
want the loop to start.

Press the A-B key (remote control) at the
point where the loop is to start.

Press the A-B key once more at the point at
where the loop is to end.

Playback jumps back to the first (A) point
and continues to the second (B) point and

then returns to the A point again, repeating
the loop.

Cancel the A-B repeat mode by pressing the

A-B

key.

NOTE

If the A and B points are too close together, A-B looping
is not possible.

The A and B points can be on either side of a track divi-
sion, but there may be a gap in the loop during play-
back in this case.

Intro check

This is a useful facility to skip through the first 10
seconds of all the tracks on a CD to refresh your
memory of the contents of the CD.

With the disc stopped, press the

INTRO

CHECK

key.

The first 10 seconds of each track on the disc
will be played. Press

STOP

to stop this play-

back process.

Pressing

INTRO CHECK

again cancels the mode and

returns to normal playback.

NOTE

This function is only available from the remote control
unit. It is not possible to use this function with the main
unit only.