Sennheiser EM 300 G3 User Manual
Putting the receiver into operation
18
Connecting receivers in a network
You can connect several receivers in a network. The receivers are remote
controlled via a PC running the “
controlled via a PC running the “
Wireless Systems Manager
” (WSM) soft-
ware. This software will assist in the quick and safe configuration of multi-
channel systems.
channel systems.
For further information on downloading the software, visit the ew G3
product page on our website at www.sennheiser.com.
product page on our website at www.sennheiser.com.
왘
Connect a standard network cable (at least Cat 5) to the LAN socket
of the receiver.
왘
Connect your receivers to an Ethernet switch.
왘
Additionally, connect a PC to the Ethernet switch as shown.
왘
Set up your multi-channel system as described on page 45.
The yellow LED
at the rear of the receiver indicates the network
activity:
XXX - XXX MHz
FREQ. RANGE-X:
SER. NO.: XXXXXXXXXX
TRUE DIVERSITY RECEIVER EM 300
IDENT. NO.: XXXXXX
IC: 2099A- XXXXXXX
DESIGNED IN GERMANY, ASSEMBLED IN USA
0682
Yellow LED ...
Connection status
... lit
Network cable connected to the Ethernet
switch or PC
switch or PC
... off
No connection