Pioneer VSX-41 User Manual

You need to hook up a component to both
analog and digital inputs on the rear of the
receiver to select between input signals.

1

¡

4

¢

7

8

3

¶

•

Press 

SIGNAL SEL (SIGNAL SELECT) to

select the input signal corresponding to the
source component.

Each press switches between 

AUTO, DVD

7.1ch, ANALOG and DIGITAL. The default is
AUTO.

DVD 7.1ch will only appear when DVD/LD is
selected using the remote or the 

INPUT SELECTOR dial on the front panel.

When set to 

DIGITAL, 2 DIGITAL lights when

a Dolby Digital signal is input, and 

DTS lights

when a DTS signal is input.

•

This receiver can only play back

Dolby Digital, PCM (32kHz, 44kHz, 48kHz,
and 96 kHz) and DTS digital signal
formats. With other digital signal formats,
set to 

ANALOG.

•

You may get digital noise when a LD

or CD player compatible with DTS is
playing an analog signal. To prevent noise,
make the proper digital connections (page
14) and set the signal input to 

DIGITAL.

•

Some DVD players don’t output DTS

signals. For more details, refer to the
instruction manual supplied with your DVD
player.

1

¡

4

¢

7

8

3

¶

Use the 

MULTI CONTROL buttons on the

remote (or 

MULTI JOG/INPUT SELECTOR dial

on the front panel).

If the source is Dolby Digital, DTS, or Dolby
Surround encoded, the proper decoding format
will automatically be selected and shows in the
display.