Philips C70 User Manual

3139 116 19441 (ENG)

TIMER

SLEEP TIMER

• To exit without storing the setting,

press Ç on the system.

Notes:
– During clock setting, if no button is

pressed within 90 seconds, the system
will exit clock setting mode
automatically.

– When a power interruption occurs, the

clock setting is erased.

Timer Setting

• The system can switch on to CD or

TUNER mode automatically at a
preset time. It can serve as an alarm
to wake you up.

• Before setting the timer, make sure

the clock is set correctly.

• The timer will always be switched on

once it is set.

• The volume of the timer will

increase from the minimum
level to the most recently
selected volume level.

1 Press and hold CLOCK/TIMER for

more than two seconds to select
timer mode.
™ “ AM 12:00” or “00:00" or

the last timer setting starts flashing
depending on whether you have
selected 12- or 24-hour mode..

™ The

TIMER

starts flashing.

™ The selected source is lit while

other available sources are
flashing.

2 Press CD or TUNER to select the

desired source.

• Before selecting CD, make sure a CD

is loaded in the CD carousel tray.

3 Press␣ à or á on the system to set

the hour for the timer to start.

4 Press␣ í or ë on the system to set

the minute for the timer to start.

5 Press CLOCK/TIMER to store the

start time.
™ The timer is now set.
™ The

TIMER

remains on the display.

• At the preset time, the timer will be

activated.
™ The selected source will be

played.

Notes:
– During timer setting, if no button is

pressed within 90 seconds, the system
will exit timer setting mode
automatically.

– If the source selected is TUNER, the

last tuned frequency will be switched
on.

– If the source selected is CD, playback

will begin with the first track of the
selected disc or program. If the CD
trays are empty, TUNER will be
selected instead (not for all versions).

– The timer will not activate if a recording

is in progress.

To switch off the TIMER
1 Press and hold CLOCK/TIMER for

more than two seconds.

2 Press Ç on the system to cancel the

timer.
™ The timer is now switched off.
™ The display will show "OFF" and

the

TIMER

disappears.

To start the TIMER again (for the
same preset time and source)
1 Press and hold CLOCK/TIMER for

more than two seconds.

2 Press CLOCK/TIMER again to

store the start time.
™ The timer is now on.
™ The

TIMER

appears on the display.

Sleep Timer

(only on remote

control)
This feature allows you to select a
length of time after which the system
will switch to the standby mode
automatically.

1 Press SLEEP TIMER on the

remote control repeatedly to select a
period of time.
™ The selections are as follows (time

in minutes):
60 ™ 45 ™ 30 ™ 15 ™ OFF ™
60 …

™ “SLEEP XX” or “OFF” will be

displayed. "

XX" is the time in

minutes.

2 When you reach the desired length

of time, stop pressing the SLEEP
TIMER button.
™ After this amount of time passes,

the system will switch to the
standby mode.

To switch off the Sleep Timer
• Press SLEEP TIMER repeatedly

until "

OFF" is displayed, or press the

STANDBY ON button.

pg 01-28/C50-C70/37-Eng

18/11/1999, 2:39 PM