Pioneer VSX-45TX User Manual

This page describes the buttons on the remote control used to operate the receiver.

1 Remote Control Display Screen
2 SOURCE   button

Use this button to turn on/off other compo-
nents. You must input the preset code in order
to use this function (see page 62–63).

This is a dedicated TV button. Use it to turn on/
off your TV.

3 MULTI CONTROL buttons

These buttons are the basic controls that
switch the mode of the receiver and the
remote control, which allows you to control
your other components.

TV CONT: Press so that the remote control can
operate the TV control commands.

4 Number buttons

These can be used for many purposes depend-
ing on the mode of the remote control.

When in receiver mode the buttons operate as
below:

Use to adjust the brightness of the receiver's
display.

Switches the LOUDNESS mode on or off (for
all modes except THX CINEMA and MULTI CH
IN).

This button switches between TONE ON and
TONE BYPASS, which bypasses the tone
circuitry.

Use to select whether the bass or treble will be
adjusted.

Use to adjust the TONE level, effect level and
channel level as well as make Dolby Pro Logic
II MUSIC parameter settings.

Switches between the different channels so
you can add volume individually to each
channel with the + and – buttons. Also selects
EFFECT mode of Pioneer original sound modes
and Dolby Pro Logic II MUSIC parameter
settings. You can then use the + and – buttons
to make these adjustments.

Press SIGNAL SELECT repeatedly to select one
of the following:

AUTO – If there are analog and digital signals
input, the receiver automatically selects the
digital signal.

DIGITAL – To select an optical or coaxial
digital signal.

ANALOG – To select an analog signal.

Î

¶

1

4

¡

¢

8

3

7

1

5
6
7

8

4

3

2

9

0

-

=

%

#

@

&

*

~

!

(

)
_

^

$