Pioneer VSX-45TX User Manual

This simple and quick setup method allows you to make all the necessary settings manually with the minimum
of hassle. If you did the AUTO SURROUND SOUND SETUP method on pages 13-15 you don’t need to do this
setup. You must have front and surround speakers hooked up to use this setup.
You only need to do these settings once (unless you change the placement of your current speaker system or
add new speakers, etc.). If starting fresh, complete steps 1–3 in page 36.

¶

1

¡

8

3

5∞ buttons to select QUICK.

The setup possibilities appear on your TV.

5∞ buttons to navigate

5∞ buttons to select

Make the adjustments that match your home setup
using the buttons described above.

SUBWOOFER setting:
If you connected a subwoofer select YES, if you didn’t
select NO

.

CENTER SP setting:
If you connected a CENTER speaker select YES, if you
didn’t select NO.

SURRBACK SP setting:
If you connected a SURROUND speaker(s) select YES, if
you didn’t select NO.

ROOM SIZE setting:
Tell the receiver your room size so it can equalize the
speakers properly. Use the chart below for an approximate
definition of the settings.

SMALL: 12 feet by 15 feet
MEDIUM: 18 feet by 20 feet
LARGE: 25 feet by 30 feet

LISTENING POSITION setting:
This setting establishes where your ideal listening position
is. Choose from the three possibilities following the guide
below.

FRONT: your listening position is closer to the front
speakers.
CENTER: your listening position is equidistant to the
front and surround speakers.
REAR: your listening position is closer to the surround
speakers.

5∞ buttons to select the EXIT.

You will return to the SURROUND SETUP menu display.
If you want to change a setting before proceeding
start over from step 1.

memo

If you do the QUICK setup after
the AUTO SURROUND SOUND
SETUP the former will replace the
latter.