Pioneer VSX-522-K User Manual

Page of 39
Home Menu
6
6
32
4
Confirm your selected setup option.
The test tones will start after you press 
ENTER
. After the 
volume increases to the reference level, test tones will be 
output.
5
Adjust the level of each channel using 
/
.
If you selected Manual, use 
/
 to switch speakers. The 
Auto
 setup will output test tones in the order shown on-
screen:
Adjust the level of each speaker as the test tone is 
emitted.
Note
If you are using a Sound Pressure Level (SPL) meter, take 
the readings from your main listening position and adjust 
the level of each speaker to 75 dB SPL (C-weighting/slow 
reading).
The subwoofer test tone is output at low volumes. You may 
need to adjust the level after testing with an actual 
soundtrack.
6
When you’re finished, press 
RETURN
.
You return to the Manual SP Setup menu.
Tip
You can change the channel levels at any time by press 
, then press 
CH SELECT
 and 
LEV +/–
 on the 
remote control. You can also press 
CH SELECT
 and use 
/
 to select the channel, and then use 
/
 to adjust the 
channel levels.
Speaker Distance
For good sound depth and separation from your system, you 
need to specify the distance of your speakers from the 
listening position. The receiver can then add the proper delay 
needed for effective surround sound.
For the assignment of the digital signal inputs, see 
Selecting the audio input signal on page 20
.
1
Select ‘Manual SP Setup’ from the Home Menu.
2
Select ‘Speaker Distance’ from the Manual SP Setup 
menu. 
 
3
Adjust the distance of each speaker using 
/
.
You can adjust the distance of each speaker in 0.1 feet 
increments.
4
When you’re finished, press 
RETURN
.
You return to the Manual SP Setup menu.
The Input Assign menu
ANALOG IN1
 audio input terminal is assigned to CD under 
factory settings, but this can be changed to TV input.
1
Select ‘Input Assign’ from the Home Menu.
2
Select ‘Analog Input’ from the Input Assign menu.
 
3
Select the desired input option for the ANALOG IN1 
audio input terminal.
4
When you’re finished, press 
RETURN
.
You return to the Input Assign menu.
2c.Channel  Level
   Test  Tone      [ Manual ] 
 
        Please  Wait . . .20
                     
          Caution            
Loud  test  tones 
            will  be  output.
 
 
        
  Return
2c.Channel  Level
Front L   
Center
Front R
Surround R
Surr. Back R
Surr. Back L
Surround L
Subwoofer
Return
[        0dB]
[        0dB]
[        0dB]
[    –––     ]
[    –––     ]
[        0dB]
[        0dB]
0dB
RECEIVER
2.Manual  SP  Setup
Return  
a.Speaker  Setting
b.X.Over
c.Channel  Level
d.Speaker  Distance
2d.Speaker  Distance
Front L   
Center
Front R
Surround R
Surr. Back R
Surr. Back L
Surround L
Subwoofer
Return
[    10.0 ft   ]
[    10.0 tt   ]
[    10.0 ft   ]
[ ––––         ]
[ ––––         ]
[    10.0 ft   ]
[    10.0 ft   ]
10.0 ft
H o m e     M e nu
1 . Auto MCACC
2.Manual  SP  Setup
3.Input  Assign
4.Pre  Out  Setting
5.Auto  Power  Down
6.FL  Demo  Mode 
7.HDMI  Setup
R e t u r n
3.Input  Assign
Return  
a.Analog  Input
3a.Analog  Input
Return  
  Analog 
       
CD