Pioneer VSX-819H-S User Manual

En

Use stereo RCA phono cables to connect 
analog audio components. These cables are 
typically red and white, and you should 
connect the red plugs to R (right) terminals 
and white plugs to L (left) terminals.

Commercially available coaxial digital audio 
cables or optical cables should be used to 
connect digital components to this receiver.

1

Standard RCA video cables
These cables are the most common type of 
video connection and are used to connect to 
the composite video terminals. The yellow 
plugs distinguish them from cables for audio.

Component video cables
Use component video cables to get the best 
possible color reproduction of your video 
source. The color signal of the TV is divided 
into the luminance (

Y) signal and the color (P

 

and 

) signals and then output. In this way, 

interference between the signals is avoided. 

This receiver is not loaded with a video 
converter. When you use component video 
cables or HDMI cables for connecting to the 
input device, the same cables should be used 
for connecting to the TV.

1 • When connecting optical cables, be careful when inserting the plug not to damage the shutter protecting the optical socket.

• When storing optical cable, coil loosely. The cable may be damaged if bent around sharp corners.
• You can also use a standard RCA video cable for coaxial digital connections.

VSX-819H_RLF.book  13 ページ  ２００９年１月２０日　火曜日　午前１０時３６分