Pioneer VSX-819H-S User Manual

En

There are a number of additional sound 
settings you can make using the 

PARAMETER menu. The defaults, if not stated, 
are listed in bold.

• The 

AUDIO PARAMETER menu is not 

available with 

MULTI IN input (see 

Selecting the multichannel analog inputs 
on page 41).

• Note that if a setting doesn’t appear 

in the 

AUDIO PARAMETER menu, it is 

unavailable due to the current source, 
settings and status of the receiver.

/ to select the setting you want 

to adjust.
Depending on the current status/mode of the 
receiver, certain options may not be able to be 
selected. Check the table below for notes on this.

/ to set it as necessary.

See the table below for the options available 
for each setting.

EQ
(Acoustic Calibration 
EQ)

Switches on/off the effect of Acoustic Calibration EQ.

S.DELAY
(Sound Delay)

Some monitors have a slight delay when showing video, so 
the soundtrack will be slightly out of sync with the picture. 
By adding a bit of delay, you can adjust the sound to match 
the presentation of the video.

0.0 to 9.0 (frames)

Default: 

Allows you to hear effective surround sound of movies at 
low volumes. 

Used to get good bass and treble from music sources at 
low volumes.

(Sound Retriever)

When audio data is removed during the WMA/MP3

c

 

compression process, sound quality often suffers from an 
uneven sound image. The Sound Retriever feature employs 
new DSP technology that helps bring CD quality sound 
back to compressed 2-channel audio by restoring sound 
pressure and smoothing jagged artifacts left over after 
compression.

Specifies how dual mono encoded Dolby Digital 
soundtracks should be played.

CH1 – 
Channel 1 is heard only

CH2 – 
Channel 2 is heard only

CH1 CH2 – 
Both channels heard 
from front speakers

VSX-819H_RLF.book  39 ページ  ２００９年１月２０日　火曜日　午前１０時３６分