Pioneer VSX-819H-S User Manual

Using the tuner

3 Press PRESET

/ to select the station

preset you want.
You can also use the number buttons.

4 Press ENTER.
After pressing

ENTER, the preset number stop

blinking and the receiver stores the station.

Listening to station presets

You will need to have some presets stored to do
this. See Saving station presets on page 49 if
you haven’t done this already.

•

Press PRESET

/ to select the station

preset you want.

• You can also use the number buttons on

the remote control to recall the station
preset.

Naming preset stations

For easier identification, you can name all of
your preset stations.

1 Choose the station preset you want to

name.
See Listening to station presets above for how
to do this.

2 Press TUNER EDIT twice.
The cursor at the first character position is
blinking on the display.

3 Input the name you want.
Choose a name up to eight characters long.

• Use the

PRESET

/ buttons to select

character position.

• Use the

TUNE

/ buttons to select

characters.

• The name is stored when

ENTER is

pressed.

Tip

• To erase a station name, follow steps 1 and

2, and press

ENTER while the display is

blank. Press

TUNER EDIT while the display

is blank, to keep the previous name.

• Once you have named a station preset,

press

DISPLAY to show the name. When

you want to return to the frequency display,
press

DISPLAY several times to show the

frequency.

Changing the frequency step

If you find that you can’t tune into stations
successfully, the frequency step may not be
suitable for your country/region. Here’s how to
switch the setting:

Switch the receiver into standby.

While holding down the ‘TUNE –’ button,

press and hold the

 STANDBY/ON button

for about two seconds.
The channel tuning step alternates between
10K STEP and 9K STEP each time you do this.

08_using_tuner.fm 50 ページ２００９年２月６日　金曜日　午後１時２６分