Pioneer VSX-819H-S User Manual

En

5 Play a BD/DVD, and adjust the volume.
Make sure that 

BD/DVD is showing in the 

receiver’s display. If it isn’t, press 

BD on the 

remote to set the receiver to the BD/DVD input.

1

There are several other sound options you can 
select. See Listening to your system on page 34 
for more on this.

2

The Auto Multi-Channel Acoustic Calibration 
(MCACC) setup measures the acoustic 
characteristics of your listening area, taking 
into account ambient noise, speaker size and 
distance, and tests for both channel delay and 
channel level. After you have set up the 
microphone provided with your system, the 
receiver uses the information from a series of 
test tones to optimize the speaker settings and 
equalization for your particular room. 

• The Auto MCACC Setup will overwrite any 

existing speaker settings you’ve made.

• Before using the Auto MCACC Setup, the 

iPod USB function should not be selected 
as an input source.

• The test tones used in the Auto MCACC 

Setup are output at high volume.

SETUP MIC jack on the front panel. 
Make sure there are no obstacles between the 
speakers and the microphone.

If you have a tripod, use it to place the 
microphone so that it’s about ear level at your 
normal listening position. Otherwise, place the 
microphone at ear level using a table or a chair.

then press the SETUP button.
An on-screen display (OSD) appears on your 
TV. Use 

/// and ENTER on the remote 

control to navigate through the screens and 
select menu items. Press 

RETURN to exit the 

current menu.

• Press 

SETUP at any time to exit the System 

Setup menu.

3

Try to be as quiet as possible after pressing 

ENTER. The system outputs a series of test 
tones to establish the ambient noise level. 

1 You may need to set your BD/DVD player to output Dolby Digital, DTS and 88.2 kHz/96 kHz PCM (2 channel) audio (see your 

BD/DVD player’s manual for more on this).

2 Depending on your BD/DVD player or source disc, you may only get 2 channel sound. In this case, the listening mode must be 

set to 

STANDARD (see Listening in surround sound on page 34 if you need to do this) if you want multichannel surround sound. 

3 •  The  screensaver automatically starts after three minutes of inactivity. If you cancel the Auto MCACC Setup at any time, the 

receiver automatically exits and no settings will be made.
• The OSD will not appear if you have connected using the HDMI output to your TV. Use component or composite connections 
for system setup.

4

MIC IN blinks when the microphone is not connected to MCACC SETUP MIC.

VSX-819H_RLF.book  9 ページ  ２００９年１月２０日　火曜日　午前１０時３６分