Pioneer VSX-520 User Guide

Page of 160
Connecting your equipment
03
25
En
English
Français
Deutsch
Nederlands
Italiano
Español
Connecting antennas
Connect the AM loop antenna and the FM wire 
antenna as shown below. To improve reception 
and sound quality, connect external antennas 
(see Using external antennas below). 
1
Push open the tabs, then insert one wire 
fully into each terminal, then release the tabs 
to secure the AM antenna wires.
2
Fix the AM loop antenna to the attached 
stand.
To fix the stand to the antenna, bend in the 
direction indicated by the arrow (fig. a) then 
clip the loop onto the stand (fig. b).
3
Place the AM antenna on a flat surface 
and in a direction giving the best reception. 
4
Connect the FM wire antenna into the FM 
antenna socket.
For best results, extend the FM antenna fully 
and fix to a wall or door frame. Don’t drape 
loosely or leave coiled up.
Using external antennas
To improve FM reception
Use an F connector (not supplied) to connect 
an external FM antenna.
To improve AM reception
Connect a 5 m to 6 m (15 ft. to 18 ft.) length of 
vinyl-coated wire to the AM antenna terminal 
without disconnecting the supplied AM loop 
antenna. 
For the best possible reception, suspend 
horizontally outdoors.
ANTENNA
AM
 LOOP
2
1
3
4
fig. a
fig. b
ANTENNA
FM
  UNBAL
 75 
Ω
AM
 LOOP
F connector
ANTENNA
FM
  UNBAL
 75 
Ω
AM
 LOOP
Outdoor 
antenna
5 m to 6 m
(15 ft. to 18 ft.)
Indoor antenna 
(vinyl-coated wire)
VSX-520_UCSMXCN_En.book  25 ページ  2009年12月15日 火曜日 午後2時33分