Pioneer VSX-520 User Guide

En

The following section shows you how to make 
detailed settings to specify how you’re using 
the receiver. It also explains how to fine-tune 
individual speaker system settings.

/ to select the setting you want to 

•

SP SETUP – Specify the size, number, 
distance and overall balance of the 
speakers you’ve connected (see Manual 
speaker setup below).

•

IN ASSIG – Specify what you’ve connected 
to the component video inputs (see The 
Input Assign menu on page 40).

•

PRE OUT – Specify how to use the PRE 
OUT outputs (see The Pre Out Setting on 
page 40).

These setting optimize surround sound 
performance. You only need to make these 
settings once (unless you change the 
placement of your current speaker system or 
add new speakers).

• Depending on the PRE OUT setting, there 

will be differences in the speaker items 
that can be adjusted.

/ to select the setting you want to 

•

SP SET – Specify size / number of speakers 
connected (see Speaker setting below).

•

X.OVER – Specify which frequencies will 
be sent to the subwoofer (see Crossover 
network on page 39).

•

CH LEVEL – Adjust overall balance of your 
speaker system (see Channel level on 
page 39).

•

SP DISTN – Specify the distance of your 
speakers from the listening position (see 
Speaker distance on page 39).

VSX-520_UCSMXCN_En.book  37 ページ  ２００９年１２月１５日　火曜日　午後２時３３分