Pioneer VSX-822-K User Manual



Network connections could be restricted due to the 

computer’s network settings, security settings, etc. Check the 

computer’s network settings, security settings, etc.





The component connected to the network is not properly set. If 

the client is automatically authorized, you need to enter the 

corresponding information again. Check whether the 

connection status is set to “Do not authorize”.



There are no playable audio files on the component connected 

to the network. Check the audio files stored on the component 

connected to the network. 





The audio file currently being played back was not recorded in 

a format playable on this receiver.

- Check whether the audio file was recorded in a format 

supported by this receiver.

- Check whether the folder has been damaged or corrupted.

- Note that there are cases where even the audio files listed as 

playable on this receiver cannot be played back or displayed 

(

page 45

).



The LAN cable is currently disconnected. Connect the LAN 

cable properly (

page 20

).



There is heavy traffic on the network with the Internet being 

accessed on the same network. Use 100BASE-TX to access the 

components on the network.



When in the DMR mode, depending on the external controller 

being used, playback may be interrupted when a volume 

operation is performed from the controller. In this case, adjust 

the volume from the receiver or remote control.





In case of Windows Media Player 11: You are currently logged 

onto the domain through your PC with Windows XP or 

Windows Vista installed. Instead of logging onto the domain, 

log onto the local machine (

page 39

).



In case of Windows Media Player 12: You are currently logged 

onto the domain through your PC with Windows 7 installed. 

Instead of logging onto the domain, log onto the local machine 

(

page 39

).





The firewall settings for components on the network are 

currently in operation. Check the firewall settings for 

components on the network.



You are currently disconnected from the Internet. Check the 

connection settings for components on the network, and 

consult with your network service provider if necessary 

(

page 41

).



The broadcasts from an Internet radio station are stopped or 

interrupted. There are cases where you cannot listen to some 

Internet radio stations even when they are listed in the list of 

Internet radio stations on this receiver (

page 39

).





The remote control is not currently set to the NETWORK mode. 

Press 

 to set the remote control to the NETWORK 

mode (

page 43

).





If the problem still persists when connecting your HDMI 

component directly to your monitor, please consult the 

component or monitor manual or contact the manufacturer for 

support.





VSX-822 only: Video signals that are input from the analog video 

terminal will not output from the HDMI terminal. Signals that 

are input from the HDMI terminal will not output from the 

analog video terminal. Be consistent with the type of cable 

between input and output.



Depending in the output settings of the source component, it 

may be outputting a video format that can’t be displayed. 

Change the output settings of the source, or connect using the 

composite video jacks.



This receiver is HDCP-compatible. Check that the components 

you are connecting are also HDCP-compatible. If they are not, 

please connect them using the composite video jacks.



Depending on the connected source component, it’s possible 

that it will not work with this receiver (even if it is HDCP-

compatible). In this case, connect using the composite video 

jacks between source and receiver.



If video images do not appear on your TV, try adjusting the 

resolution, Deep Color or other setting for your component.



To output signals in Deep Color, use an HDMI cable (High 

Speed HDMI

®

 Cable) to connect this receiver to a component 

or TV with the Deep Color feature.





Check that the HDMI setting is set to AMP (

page 36

).



If the component is a DVI device, use a separate connection for 

the audio.



HDMI format digital audio transmissions require a longer time 

to be recognized. Due to this, interruption in the audio may 

occur when switching between audio formats or beginning 

playback.



Turning on/off the device connected to this unit’s HDMI OUT 

terminal during playback, or disconnecting/connecting the 

HDMI cable during playback, may cause noise or interrupted 

audio.





Check the HDMI connections.



The cable may be damaged.



Select ON for the Control with HDMI setting (see 

HDMI Setup 

on page 52

).



Turn the TV’s power on before turning on this receiver’s power.



Set the TV side Control with HDMI setting to on (see TV’s 

operating instructions).

There are cases where you may not be able to route HDMI 

signals through this receiver (this depends on the HDMI 

equipped component you are connecting-check with the 

manufacturer for HDMI compatibility information).
If you aren’t receiving HDMI signals properly through this 

receiver (from your component), please try the following 

configuration when connecting up.

Connect your HDMI-equipped component directly to the 

display using an HDMI cable. Then use the most convenient 

connection (digital is recommended) for sending audio to the 

receiver. See the operating instructions for more on audio 

connections. Set the display volume to minimum when using 

this configuration.

•

Depending on the component, audio output may be limited 

to the number of channels available from the connected 

display unit (for example audio output is reduced to 2 

channels for a monitor with stereo audio limitations).