Pioneer VSX-516-S/-K User Manual

 

En

 

No sound from surround or 
center speakers.

• Connect the speakers properly (refer to page 17).
• Refer to 

 

 on page 38 to check the speaker settings.

• Refer to 

 

 on page 39 to check the speaker levels.

No sound from surround back 
speaker 

 

• Refer to 

 

 on page 38 to check the surround back 

speaker settings.
• Refer to 

 

 on page 39 to check the speaker levels.

• Refer to 

 

 on page 31 to 

make sure surround back channel processing and the sound mode 
are set for surround back sound.

No sound from subwoofer.

• Make sure the subwoofer is switched on.
• If the subwoofer has a volume knob, make sure it’s turned up.
• The Dolby Digital or DTS source you are listening to may not have 
an LFE channel.
• Switch the subwoofer setting in 

 

 on page 38 to 

 

 

or 

 

.

• Switch the 

 

 on page 40 to 

 

 or 

 

.

Noise during playback of a 
cassette deck.

• Move the cassette deck further from your receiver, until the noise 
disappears.

No sound is output or a noise 
is output when software with 
DTS is played back.

• Set the digital volume level of the player to full, or to the neutral 
position.

During a playback search, 
noise is output from a DTS 
compatible CD player.

• This is not a malfunction, but be sure to turn the volume down to 
prevent the output of loud noise from your speakers.

Can’t operate the remote 
control.

• Replace the batteries (refer to page 5).
• Operate within 7 m, 30° of the remote sensor on the front panel 
(refer to page 5).
• Remove the obstacle or operate from another position.
• Avoid exposing the remote sensor on the front panel to direct light.

The display is dark or off.

• Press 

 

 on the remote repeatedly to return to the default. 

VSX_516.book.fm 51 ページ ２００６年２月２１日　火曜日　午後４時５２分