Pioneer VSX-909RDS-G User Manual

En

The area in which you can use the remote control to operate
the VSX-909RDS/909RDS-G is fairly large. To use, point the
remote control toward the remote sensor on the front panel of
this unit while within the range shown right.

Remote control may not function properly if:
• There are obstacles between the remote control and the

remote sensor.

• Direct sunlight or fluorescent light is shining onto the

remote sensor.

• The receiver located near a device emitting infrared rays.
• Operated simultaneously with another remote control which

uses infrared rays.

°

°

memo

Πmark.

Πmark.

• You can also control PIONEER components (and those made by other manufacturers) by pointing the

receiver’s remote control directly at the respective components. This type of operation does not require
control cords. All you have to do is recall the appropriate preset code (refer to “Recalling preset
codes” on page 65).

• If you use a remote control hooked up via the CONTROL IN jack with a control cord, you won't be able

to use this unit's remote control.

Connecting an optional control cord allows you to operate other PIONEER components simply by pointing the
receiver’s remote control at the remote sensor on the front panel of the receiver. The receiver then sends the
remote control signals to the other components via the CONTROL OUT terminal.