Pioneer VSX-909RDS-G User Manual

En

The following steps show you how to specify the type of speakers you connected. Use the 

5¥∞ and 2¥3

buttons to make a selection from the on-screen menus, and use the ENTER button to register the information. If
continuing from the previous page go to step 1. If starting fresh, complete steps 1-3 on p.30 first.

last set up, it will already be selected) with the
5¥∞ buttons then press the ENTER button.

See “Setting Up for Surround Sound“

 on page 30 if you are

unsure how to do this.

2¥3

∞ button.

To specify each speaker individually select FREE.

If you connected a complete set of THX speakers select THX
and skip the SURROUND BACK part of step 3.

1 Press 

2 or 3 to move the hand to LARGE (or LARGE X2), SMALL

(or SMALL X2), or NO (you can't select NO for the FRONT
speakers). For the subwoofer you can select YES, NO, or PLUS.
See below for a detailed explanation of every speaker choice.

2 Press 

∞.

3 Repeat 1 and 2 for each speaker.

• Select SMALL to send bass frequencies to the subwoofer.

• Select LARGE if your speakers will reproduce bass frequen-

cies effectively or if you did not connect a subwoofer.

(If you select SMALL for the front speakers the subwoofer will
automatically be set to YES. Also, the center, surround and
surround back speakers cannot be set to LARGE if the front
speakers are set to SMALL. In this case, all bass frequencies
are sent to the  subwoofer.)

Î

¶

8

7

3

1

¡

4

¢