Pioneer VSX-909RDS-G User Manual

En

The following steps show you how to adjust the crossover network. The crossover network is the frequency at
which the system divides the signal and sends the different parts to different speakers. Speaking precisely, this
setting sets the cutoff point for the bass frequencies rerouted from your SMALL speakers to your subwoofer or
speaker set to LARGE.
If continuing from Channel Level go to step 1. If starting fresh, complete steps 1-3 in “Setting Up for Surround
Sound“ (p.30) first.

See "Setting Up for Surround Sound" on page 30 if you are
unsure how to do this.

• The default setting is 80 Hz.

Setting speakers to SMALL in “SPEAKER SETTING“ sends the
respective channel's bass frequencies to the subwoofer (or
LARGE speakers). The present function lets you determine
which frequencies will be sent to the subwoofer or LARGE
speakers.

1 Use the 

2 or 3 button to select 80 Hz, 100 Hz, or 150 Hz.

2 Press the 

∞ button.

Sends bass frequencies below 80 Hz to the subwoofer (or
LARGE speakers).

Sends bass frequencies below 100 Hz to the subwoofer (or
LARGE speakers).

Sends bass frequencies below 150 Hz to the subwoofer (or
LARGE speakers).

Experiment with the different settings to see which sounds
best to you.

Next, proceed to BASS PEAK LEVEL on the next page.

If you want to change a setting before proceeding select a
new crossover frequency.

Î

¶

8

7

3

1

¡

4

¢