Pioneer VSX-919AH-K User Manual

En

If the problem is not solved after the troubleshooting above, if the screen freezes unexpectedly or 
if the buttons on the remote control or front panel stop working completely, do the following:

• Press 

 STANDBY/ON on the front panel to turn off the power, then turn the power back on.

• If the power cannot be turned off, press and hold 

 STANDBY/ON on the front panel for over 

10 seconds. The power will turn off. (In this case, the various settings made on the receiver may 
be cleared.)

A USB memory device is 
connected and displayed, 
but the audio files stored 
on the USB memory 
device cannot be played 
back.

Some formats of a USB memory 
device, including FAT 12, NTFS, and 
HFS, cannot be played back on this 
receiver.

Check whether the format of your USB 
memory device is either FAT 16 or FAT 32. 
Note that the FAT 12, NTFS, and HFS 
formats cannot be played back on this 
receiver (page 45).

The file format cannot be properly 
played back on this receiver.

See the list of file formats that can be played 
back on this receiver (page 48).

Antenna is not properly connected.

Check that the antenna cable is attached 
securely.

SIRIUS Connect tuner is not 
properly connected.

Check that the 8 pin mini DIN cable and AC 
Adapter are attached securely.

The SIRIUS signal is too weak at the 
current location.

n/a

Unit is updating subscription.

Wait until the encryption code has been 
updated.

Unit is updating channels.

Wait until the encryption code has been 
updated.

Selected channel is not available/
does not exist.

Select another channel.

The SIRIUS Connect tuner’s 
firmware is being updated.

Wait for updating to finish.

VSX-1019_KU.book  Page 112  Thursday, January 8, 2009  12:01 PM