Pioneer VSX-AX3-K User Manual

Easy Setup Guide Part 1

3 Setting up the Main Unit

1 Connect the supplied AC power cord to the AC IN on this receiver and plug in the

other end to a wall outlet.

2 Press the

OFFON button to put the receiver in ON mode.

3 Press the

 STANDBY/ON button to switch the receiver ON.

4 Assigning the Digital Inputs

This is only necessary if you did not hook up your DVD player to DIGITAL IN 3 using a coaxial cable but rather
connected it to one of the optical digital inputs. The following example shows how to assign the DIGITAL IN 2 jack to
DVD.

1 Turn on the receiver and your TV,

press the RECEIVER button on the
remote control.

2 Press the SYSTEM SETUP button.

The SYSTEM SETUP menu appears on your TV (if it
doesn’t, refer to page 10 to make sure you have prop-
erly connected the receiver to your TV).

3 Looking at the on-screen display on

your TV, use the

 buttons to

select INPUT ASSIGN. Press the
ENTER button.

4 DIGITAL IN-SELECT should be

selected, if not use the

 buttons

to select it. Press the ENTER button.

5 Use the

 buttons to select

DIGITAL-2 and press ENTER.

The default setting for the DIGITAL-2 jack is CD-R.

6 Use the

 buttons to select DVD/

LD and press ENTER.

7 Press the SYSTEM SETUP button.

The receiver exits the setup process.

00_VSX-AX3.book Page 12 Monday, May 19, 2003 1:05 PM