Pioneer VSX-AX3-K User Manual

Page of 104
Connecting Your Equipment
20
En
Connecting Analog Audio Components
Before making or changing the connections, switch off the power and disconnect the power cord from the AC 
outlet.
Connect your audio components to the jacks as shown below. These are all analog connections and your 
analog audio components (turntable, cassette deck) use these jacks. Remember that for components you 
want to record with you need to hook up four plugs (a set of stereo ins and a set of stereo outs), but for 
components that only play (like a turntable) you only need to hook up one set of stereo plugs (two plugs). If 
you want to record to/from digital components (like a CD-R) to/from analog components you must hook up 
your digital equipment with these analog connections.
*The arrows indicate the direction of the audio signal.
Memo:
Depending on where the cassette deck is placed, noise may occur during playback of your cassette deck 
which is caused by leakage flux from the transformer in the receiver. If you experience noise, move the 
cassette deck farther away from the receiver.
ANALOG
 Audio cords
Use (RCA) audio cords (not supplied) to 
connect the audio components.
Connect red plugs to R 
(right) and white plugs 
to L (left).
Be sure to insert 
completely.
CD player
       Cassette deck
         CD recorder
Turntable (etc)
If you use a turntable with this 
LINE IN jack only connect one 
with a built-in phono equalizer.
00_VSX-AX3.book  Page 20  Monday, May 19, 2003  1:05 PM