Pioneer VSX-C550 User Manual

44

En

This button selects the type of input signal, ANALOG,
DIGITAL or AUTO, sent to the receiver. You need to take
special care to switch to the appropriate input when
necessary. For example, the switch would have to be on
DIGITAL to hear Dolby Digital or DTS surround sound
material but it would have to be on analog to record
from the ANALOG out jacks on the receiver. The default
setting is AUTO which chooses digital over analog when
both are available but goes with whatever is available if it
is the only choice.

• If there are no digital inputs (see p.12–15), the

SIGNAL SELECT will default to AUTO.

• Set the SIGNAL SELECT to ANALOG if you want to

use the receiver for karaoke.

Use this function to listen to the receiver and have it turn
off at a specified time without you having to do anything.
As is clear from the title this function is useful for
drifting off to sleep while listening to music.

SEL. ANA

SEL. DIG

SEL. AUTO

• When the SLEEP timer has been set, or is active, a dot

indicator will appear in the display (to the left of the
volume indicator).

• Press the SLEEP button once to view how much time

is left on the timer before shutdown. Each press after
that will cycle through the possible SLEEP time
lengths.

SLEEP indicator

Use this feature to reset the system to its factory default
settings.

• If the receiver is disconnected from a power source

for more than a month, or the main power is turned
off, it will reset to the default settings.

• The above reset doesn’t affect the presets that you

have programmed into the remote control (see page
46-47).

• The receiver resets to STANDBY.

2

2