Pioneer VSX-D3S User Manual
<
ARB7050
>
19
VIDEO RECORDING
Refer to the connection procedures on pages 8 to 10 and refer
to the VCR’s Operating Instructions regarding proper operation
procedures. Recording can be performed on both VCR 1 and
VCR 2.
to the VCR’s Operating Instructions regarding proper operation
procedures. Recording can be performed on both VCR 1 and
VCR 2.
1. Select the source you want to record from with the input
selector buttons.
÷ When recording from a LaserDisc on VCR 1 or VCR 2 = LD
÷ When recording from a LaserDisc on VCR 1 or VCR 2 = LD
÷ When recording from the TV tuner on VCR 1 or VCR 2
= TV/SAT
÷ When recording from VCR 1 on VCR 2 = VCR 1
÷ When recording from VCR 2 on VCR 1 = VCR 2
÷ When recording on VCR 1 or VCR 2 from a component
connected to the front panel VIDEO INPUT jacks
= VIDEO
2. Start recording on the VCR.
For VCR, select a line input (external input).
3. Start playback on the component selected with the input
selector buttons.
The volume, balance and tone controls have no effect on the
recording.
The volume, balance and tone controls have no effect on the
recording.
NOTE:
When recording with VCR 1, be sure the input selector is set to
a position other than VCR 1. When recording with VCR 2, be sure
the input selector is set to a position other than VCR 2.
When recording with VCR 1, be sure the input selector is set to
a position other than VCR 1. When recording with VCR 2, be sure
the input selector is set to a position other than VCR 2.
GUI operation enables easy copying from a LaserDisc to VCR 1
(or 2), and copying between VCR 1 and VCR 2. (Refer to page 28.)
(or 2), and copying between VCR 1 and VCR 2. (Refer to page 28.)
SURROUND EFFECT
1. Select the desired mode with the DOLBY PRO-LOGIC button,
DSP MODE button and AC-3 button.
The DSP MODE changes in sequence each time the DSP
MODE button is pressed. (The DSP MODE indicator lights.)
The DSP MODE changes in sequence each time the DSP
MODE button is pressed. (The DSP MODE indicator lights.)
÷ Press the DSP OFF button to switch the DSP off.
÷ If rear speakers are not selected during SPEAKER MODE
setting (page 29), pressing the DOLBY PRO-LOGIC button
selects DOLBY 3CH LOGIC.
selects DOLBY 3CH LOGIC.
2. Adjust levels to achieve a correct surround sound
reproduction.
This is done using GUI (page 24). For details concerning how
to perform level adjustment, refer to page 30.
This is done using GUI (page 24). For details concerning how
to perform level adjustment, refer to page 30.
JAZZ
3
DANCE
HALL
SIMULATED
SURROUND
SURROUND
2
2
3
3
THEATER
2
off
You can set this unit to match the requirements and
specifications of your stereo system’s speakers (whether or
not center speaker(s), rear speakers or a sub-woofer are
used, speaker size, etc.) to assure optimum sound quality.
Before using, perform settings in the SPEAKER MODE (refer
to page 29).
specifications of your stereo system’s speakers (whether or
not center speaker(s), rear speakers or a sub-woofer are
used, speaker size, etc.) to assure optimum sound quality.
Before using, perform settings in the SPEAKER MODE (refer
to page 29).
NOTE:
This unit does not feature conventional switching between
NORMAL / WIDE / PHANTOM center modes.
This unit does not feature conventional switching between
NORMAL / WIDE / PHANTOM center modes.
1
1