Pioneer VSX-AX3-S User Manual

Page of 104
Connecting Your Equipment
25
En
PREPARATION
Connecting Speakers
Before making or changing the connections, switch off the power and disconnect the power cord from the AC 
outlet.
We recommend a full complement of seven speakers and a subwoofer as shown here but, naturally, 
everyone’s home setup will vary. Simply connect the speakers you have in the manner described below.
One of the latest features of home theater is the use of surround back speakers. These speakers add even 
greater realism in movie sound effects and some new discs with soundtracks in Dolby Digital or DTS 
incorporate these channels. See page 27 for speaker placement.
In general, make sure you connect the speaker on the right to the R terminal and the speaker on the left to the 
L terminal. Also make sure the positive and negative (+/–) terminals on the receiver match those on the 
speakers.
Memo:
We recommend speakers with a nominal impedance rated 8 
Ω
 - 16 
Ω 
, but you can change the speaker 
impedance setting of the receiver (see page 26).
• If you only have one surround back speaker hook it up to the left surround back terminal.
• If you are using a THX certified subwoofer use the THX INPUT jack on the subwoofer (if your subwoofer has one) 
or switch the filter position to THX on your subwoofer.
 Speaker terminals
1 Twist exposed wire 
strands tightly together.
2 Loosen speaker terminal 
and insert exposed wire.
3 Tighten 
terminal.
Powered
subwoofer
Front
speaker
(Left)
TV/monitor
Center
speaker
Front
speaker
(Right)
Surround
speaker
(Left)
Surround
speaker
(Left)
Surround
speaker
(Right)
Surround back
speaker (Right)
Surround back
speaker (Left)
00_VSX-AX3.book  Page 25  Monday, May 19, 2003  1:05 PM