Pioneer VSX-AX3-S User Manual
3
En
TWO VOLTAGE SELECTOR
SWITCHES (multi-voltage
model only)
SWITCHES (multi-voltage
model only)
Only multi-voltage model is provided with these
switches.
European models are not provided with these
switches.
switches.
European models are not provided with these
switches.
Main voltages in Saudi Arabia are 127 V and 220 V
only. Never use this model with the 110 V setting
in Saudi Arabia.
only. Never use this model with the 110 V setting
in Saudi Arabia.
There are two VOLTAGE SELECTORS. Be sure
both of these are set correctly. Always check
that these selectors are set properly before
plugging the power cord into the wall outlet.
1. Disconnect the power cord.
2. Use a small-sized screwdriver.
3. Insert the screwdriver into the groove of the
both of these are set correctly. Always check
that these selectors are set properly before
plugging the power cord into the wall outlet.
1. Disconnect the power cord.
2. Use a small-sized screwdriver.
3. Insert the screwdriver into the groove of the
smaller voltage selector and adjust until the
voltage is the same as at the larger one.
voltage is the same as at the larger one.
Operating Environment
Operating environment temperature and humidity:
+5°C – +35°C (+41°F – +95°F); less than 85%RH
(cooling vents not blocked)
Do not install in the following locations
• Location exposed to direct sunlight or strong
+5°C – +35°C (+41°F – +95°F); less than 85%RH
(cooling vents not blocked)
Do not install in the following locations
• Location exposed to direct sunlight or strong
artificial light
• Location exposed to high humidity, or poorly
ventilated location
[For European model]
CAUTION 220 V
Power source voltage is factory adjusted 220 volts. If
your area is different, change voltage selectors
settings.
Power source voltage is factory adjusted 220 volts. If
your area is different, change voltage selectors
settings.
H040 En
00_VSX-AX3.book Page 3 Monday, May 19, 2003 1:05 PM