Pioneer VSX-AX3-S User Manual
Displays and Controls
33
En
PREPARATION
Display
All the display information is explained and/or referenced here.
1 SIGNAL indicators
Light to indicate the input signal you selected.
AUTO: Lights when the receiver is set to select
the input signal automatically.
the input signal automatically.
DIGITAL: Lights when digital audio signals are
selected.
selected.
ANALOG: Lights when analog signals are
selected.
selected.
2 Digital format indicators
PRO LOGIC II: Lights during Dolby Pro Logic II
processing.
processing.
NEO:6: Lights during NEO:6 processing.
2 DIGITAL: Lights when a Dolby Digital signal
is detected.
2 DIGITAL: Lights when a Dolby Digital signal
is detected.
DTS: Lights when a DTS signal is detected.
ES: Lights when playing back a DTS ES signal.
ES: Lights when playing back a DTS ES signal.
EX: Lights when playing back a Dolby Digital EX
signal.
signal.
STEREO: Lights during two-channel playback.
3 LOUDNESS indicator
Lights when LOUDNESS is on.
4 MIDNIGHT indicator
Lights when MIDNIGHT is on.
5 TONE indicator
Lights when the TONE control is on.
6 DNR indicator
Lights when DIGITAL NR is on.
7 TUNER indicators
STEREO: Lights when an FM stereo broadcast is
received in the auto stereo mode.
received in the auto stereo mode.
MONO: Lights when the tuner is set to receive
FM broadcasts and when MPX mode is selected.
FM broadcasts and when MPX mode is selected.
TUNED: Lights when a broadcast is received.
RF ATT (European model only): Lights when the
RF ATT is on (see page 56).
RF ATT is on (see page 56).
RDS (European model only): Lights when an RDS
broadcast is received.
broadcast is received.
EON (European model only): EON lights when
it has been set. The dot indicator next to it lights
it has been set. The dot indicator next to it lights
when the station you are currently tuned to
carries the EON data service.
carries the EON data service.
8 Volume level indicator
9 Hi-BIT/SAMPLING indicator
9 Hi-BIT/SAMPLING indicator
Lights when the AUDIO SCALER mode is on.
10 DSP indicators
MOVIE: Lights when a MOVIE mode is selected.
When a DSP MOVIE mode is selected DSP will
light with a box around it.
When a DSP MOVIE mode is selected DSP will
light with a box around it.
MUSIC: Lights when a MUSIC mode is selected.
When a DSP MUSIC mode is selected DSP will
light with a box around it.
When a DSP MUSIC mode is selected DSP will
light with a box around it.
11 Speaker indicators (see page 72)
Lights to indicate the current speaker system, A
and/or B.
and/or B.
12 Program Format indicators
For Dolby Digital or DTS sources: These
indicators change according to which channels
are active in the source. When all three
indicators change according to which channels
are active in the source. When all three
LS (left
surround),
S (surround) and RS (right surround)
light at the same time it means a source with a
6.1 channel playback flag is being used.
6.1 channel playback flag is being used.
L – Left front channel.
C – Center channel.
R – Right front channel.
LS – Left surround channel.
S – Surround channel or Surround back channel.
RS – Right surround channel.
LFE – Low Frequency Effects channel.
– Lights when LFE signal is input.
13 SB CH indicators (see page 53)
Light to indicate the status of the surround back
channels.
channels.
AUTO – Lights when the SB CH MODE or virtual
surround back mode is set to AUTO.
surround back mode is set to AUTO.
ON – Lights when the SB CH MODE or virtual
surround back mode is set to ON.
surround back mode is set to ON.
OFF – Lights when the SB CH MODE or virtual
surround back mode is set to OFF.
surround back mode is set to OFF.
00_VSX-AX3.book Page 33 Monday, May 19, 2003 1:05 PM