Pioneer VSX-D2011-G User Manual

En

Before making or changing the connections, switch off the power and disconnect the power cord from
the AC outlet.

We recommend a full complement of seven speakers and a subwoofer as shown here but, naturally,
everyone's home setup will vary. Simply connect the speakers you have in the manner described below.

One of the latest features of home theater is the use of surround back speakers. These speakers add
even greater realism in movie sound effects and some new discs with soundtracks in Dolby Digital or DTS
incorporate these channels. See page 27 for speaker placement.

In general, make sure you connect the speaker on the right to the R terminal and the speaker on the left
to the L terminal. Also make sure the positive and negative (+/–) terminals on the receiver match those on
the speakers.

• We recommend speakers with a nominal impedance rated 8 

Ω-16 Ω, but you can change the

• If you only have one surround back speaker hook it up to the left surround back

terminal.

• If you use a THX certified subwoofer use the THX INPUT jack on the subwoofer (if your

subwoofer has one) or switch the filter position to THX on your subwoofer.

memo

7 Speaker terminals

1 Twist exposed wire

strands tightly
together.

2 Loosen speaker terminal

and insert exposed wire.

3 Tighten

terminal.

10mm

PCM/
2DIGITAL /
DTS/MPEG

·

ª

·

ª

1

1

2

2

3

4

Ω

Å

ı