Pioneer VSX-D2011-G User Manual

En

When EON is turned on, the receiver jumps to an EON-linked broadcast when it begins, even if a receiver
function other than the tuner is being used. It cannot be used in areas that EON information is not transmitted
and when FM broadcast stations do not transmit PTY data. When the broadcast ends, the tuner returns to the
original frequency or function.

There are two types of EON you can set:

1

TA (Traffic Announcement)

This mode will set the tuner to pick up traffic information when it’s broadcast.

2

This mode will set the tuner to pick up news when it is broadcast.

EON does not work when the tuner is in the AM band.

memo

• The EON mode is canceled if you switch

to AM reception while setting EON. It
starts once again when you return to FM
reception.

• You can’t search for traffic

announcements and news at the same
time.

• You can’t operate the TUNER EDIT and

CHARACTER SEARCH buttons while the
EON indicator is lit.

• If you want to change to a function other

than the tuner, press the EON MODE
button and turn the EON mode off.

Use the front panel controls to do this.

EON is only broadcast on FM.

The 

‡ indicator lights to inform you that the currently

tuned station carries the EON data service. See pages
57–58 for more on tuning into radio broadcasts.

These modes are explained above.
Each press changes the display as follows:

If EON information is being transmitted, the receiver
jumps to the type of broadcast you selected. When the
EON mode is set, the EON indicator lights, but during
actual reception of an EON broadcast the EON
indicator will flash.

EON  NEWS

OFF

EON  TA

memo