Sony STR-DH810 User Manual

• Check the HDMI connection (page 24).
• You cannot listen to the Super Audio CD 

by connecting HDMI.

• Depending on the playback component, 

you may need to set up the component. 
Refer to the operating instructions 
supplied with each component.

• Be sure to use a High Speed HDMI cable 

when you view images or listen to sound 
during Deep Colour (Deep Color) 
transmission.

• Check the HDMI connection (page 24).
• Depending on the playback component, 

you may need to set up the component. 
Refer to the operating instructions 
supplied with each component.

• Be sure to use a High Speed HDMI cable 

when you view images or listen to sound 
during Deep Colour (Deep Color) 
transmission.

• Check the HDMI connection (page 24).
• Make sure “CTRL: HDMI” is set to 

“CTRL ON” in the HDMI menu. 

• Make sure the connected component is 

compatible with the Control for HDMI 
function.

• Check the Control for HDMI settings on 

the connected component. Refer to the 
operating instructions of the connected 
component.

• Repeat the procedures of “Preparing for 

the “BRAVIA” Sync” if you change the 
HDMI connection, connect/disconnect the 
AC power cord (mains lead), or when 
there is a power failure (page 56).

• Make sure the TV is compatible with the 

System Audio Control function.

• If the TV does not have System Audio 

Control function, set the “AUDIO OUT” 
settings in HDMI menu to
– “TV+AMP” if you want to listen to the 

sound from the TV speaker and receiver.

– “AMP” if you want to listen to the sound 

from the receiver.

• When you connect the receiver to a video 

component (projector, etc.), sound may 
not be output from the receiver. In this 
case, select “AMP”.

• If you cannot listen to the sound of a 

component connected to the receiver
– Change the input of the receiver to 

HDMI when you want to watch a 
program on a component connected via 
HDMI connection to the receiver.

– Change the TV channel when you want 

to watch a TV broadcast.

– Select the component or input you want 

to watch when you watch a program on 
the component connected to the TV. 
Refer to the operating instructions of the 
TV on this operation.

• When the receiver is in standby mode, 

image and sound are output from the 
HDMI component selected the last time 
you turned off the receiver. If you are 
enjoying other component, play the 
component and perform the One-Touch 
Play operation, or turn on the receiver to 
select the HDMI component you want to 
enjoy.

• Make sure “PASS THRU” is set to “ON” 

in the HDMI menu if you connect 
components not compatible with the 
“BRAVIA” Sync to the receiver (page 56).