Sony STR-VA333ES User Manual
58
GB
Using the Sleep Timer
You can set the receiver to turn off
automatically at a specified time by using the
remote.
automatically at a specified time by using the
remote.
For details, refer to the operating instructions
supplied with the remote.
supplied with the remote.
Select SLEEP from the RECEIVER menu
repeatedly while the power is on.
repeatedly while the power is on.
Each time you select SLEEP, the display
changes cyclically as follows:
changes cyclically as follows:
2:00:00
t 1:30:00 t 1:00:00 t 0:30:00 t
OFF
While using Sleep Timer, “SLEEP” lights up in
the display.
the display.
Models of area code TW, KR only
You can also use the SLEEP button on the
receiver.
receiver.
Tip
To check the remaining time before the receiver turns
off, select or press SLEEP. The remaining time
appears in the display.
off, select or press SLEEP. The remaining time
appears in the display.
Selecting the speaker
system
system
Set the SPEAKERS switch according to the
front speakers you want to drive.
front speakers you want to drive.
Set to
To select
A
The speakers connected to the FRONT
SPEAKERS A terminals.
SPEAKERS A terminals.
B
The speakers connected to the FRONT
SPEAKERS B terminals.
SPEAKERS B terminals.
A+B*
The speakers connected to both the
FRONT SPEAKERS A and B
terminals (parallel connection).
The sound field is automatically set to
2CH STEREO.
FRONT SPEAKERS A and B
terminals (parallel connection).
The sound field is automatically set to
2CH STEREO.
OFF
No speaker output.
* Be sure to connect front speakers with a nominal
impedance of 8 ohms or higher if you want to select
both sets of front speakers (A+B). In this case, set
the IMPEDANCE SELECTOR to “4
both sets of front speakers (A+B). In this case, set
the IMPEDANCE SELECTOR to “4
Ω
”.