Sony STR-DH550 User Manual
MULTI CHANNEL AV RECEIVER
STR-DH750/STR-DH550
Passing HDMI signals through (Pass Through)
You can output HDMI signals to the TV even when the receiver is in standby mode.
1. Select [Settings] - [HDMI Settings] from the home menu.
2. Select [Pass Through].
3. Select the setting you want.
On
(*): The receiver continuously outputs HDMI signals from the HDMI TV OUT jack when in standby
mode.
Auto:
The receiver outputs HDMI signals to the TV from the HDMI TV OUT jack when the TV is turned
on while the receiver is in the standby mode.
Sony recommends this setting if you are using a “BRAVIA” Sync-compatible Sony TV. This setting
saves power in the standby mode compared to the [On] setting.
Sony recommends this setting if you are using a “BRAVIA” Sync-compatible Sony TV. This setting
saves power in the standby mode compared to the [On] setting.
Off:
The receiver does not output HDMI signals when in standby mode.
This setting saves power in the standby mode compared to the [On] setting.
*
For USA, Canadian, and Australian models only
Note
[Auto] can only work when [Control for HDMI] is set to [On].
When the receiver is in standby mode, the
When the receiver is in standby mode, the
(on/standby) indicator on the front panel lights up in amber if
[Pass Through] is set to [On] or [Auto].
When [Auto] is selected, it may take a little more time for the image and sound to be output to the TV than
when [On] is selected.
When [Auto] is selected, it may take a little more time for the image and sound to be output to the TV than
when [On] is selected.
4-488-933-11(1)
Copyright 2014 Sony Corporation
129