Sony STRDG710 User Manual

ther O

tions

Changing the display

You can check the sound field, etc., by
changing the information on the display.
Be sure to use the buttons on the receiver for
this operation.

Press DISPLAY repeatedly.

Each time you press the button, the display
changes cyclically as follows.

All inputs except the FM and AM
band and XM Radio

Index name of the input

t Selected input

t Sound field currently applied

FM and AM band

Preset station name

t Frequency t Sound

field currently applied

XM Radio

Channel name

t Channel number t

Category name

t Artist name/Feature t

Song/program title

t Sound field currently

applied

Index name appears only when you have assigned
one to the input or preset station (page 59, 72).
Index name does not appear when only blank
spaces have been entered, or it is the same as the
input name.

Note

Character or marks may not be displayed for some
languages.

Using the Sleep Timer

You can set the receiver to turn off
automatically at a specified time.

Press SLEEP repeatedly while the
power is on.

Each time you press the button, the display
changes cyclically as follows:

2-00-00

1-30-00

t 1-00-00 t 0-30-00

t OFF

When sleep timer is activated, the display
dims.

Note

If you press any buttons on the remote or receiver
after the display dims, the display brightens up.
After a while, the display dims again if no button is
pressed.

Tip

To check the remaining time before the receiver
turns off, press SLEEP. The remaining time appears
on the display. If you press SLEEP again, the sleep
timer will be canceled.