Sony R-DG1200 User Manual
132
US
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01US-
STRDG1200CEL\110ADD.fm
STRDG1200CEL\110ADD.fm
masterpage: Left
STR-DG1200
3-289-135-11(1)
Specifications
AUDIO POWER
SPECIFICATIONS
SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
With 8 ohm loads, both channels driven, from
20 – 20,000 Hz; rated 100 watts per channel
minimum RMS power, with no more than
0.09% total harmonic distortion from 250
milliwatts to rated output.
HARMONIC DISTORTION:
With 8 ohm loads, both channels driven, from
20 – 20,000 Hz; rated 100 watts per channel
minimum RMS power, with no more than
0.09% total harmonic distortion from 250
milliwatts to rated output.
Amplifier section
POWER OUTPUT
Rated Power Output at Stereo Mode
POWER OUTPUT
Rated Power Output at Stereo Mode
1)
(8 ohms 20 Hz – 20 kHz, THD 0.09%):
100 W + 100 W
Reference Power Output at Stereo Mode
(4 ohms 20 Hz – 20 kHz, THD 0.15%):
(4 ohms 20 Hz – 20 kHz, THD 0.15%):
85 W + 85 W
Reference Power Output
(8 ohms 1 kHz, THD 0.7%)
FRONT
(8 ohms 1 kHz, THD 0.7%)
FRONT
2)
: 110 W
+
110 W
CENTER
2)
:
110 W
SURROUND
2)
: 110 W
+
110 W
SURROUND BACK
2)
:
110 W + 110 W
Reference Power Output
(4 ohms 1 kHz, THD 0.7%)
FRONT
(4 ohms 1 kHz, THD 0.7%)
FRONT
2)
: 100 W
+
100 W
CENTER
2)
: 100 W
SURROUND
2)
: 100 W
+
100 W
SURROUND BACK
2)
:
100 W + 100 W
1)
Depending on the sound field settings and the
source, there may be no sound output.
source, there may be no sound output.
2)
Measured under the following conditions:
Power requirements: 120 V AC, 60 Hz
Power requirements: 120 V AC, 60 Hz
Frequency response
PHONO
RIAA equalization curve
± 0.5 dB
± 0.5 dB
Analog
10 Hz – 100 kHz,
±3 dB (with sound field
and equalizer bypassed)
±3 dB (with sound field
and equalizer bypassed)
Input
PHONO
Sensitivity: 2.5 mV
Impedance: 50 kohms
S/N
Impedance: 50 kohms
S/N
3)
: 90 dB
(A, 20 kHz LPF)
4)
Analog
Sensitivity: 150 mV/
50 kohms
S/N
50 kohms
S/N
3)
: 100 dB
(A, 20 kHz LPF)
4)
Digital (Coaxial) Impedance: 75 ohms
S/N: 96 dB
(A, 20 kHz LPF)
(A, 20 kHz LPF)
4)
Digital (Optical)
S/N: 96 dB
(A, 20 kHz LPF)
(A, 20 kHz LPF)
4)
Output (analog)
AUDIO OUT
Voltage: 150 mV/
1 kohm
1 kohm
SUBWOOFER
Voltage: 2 V/1 kohm
Equalizer
Gain levels
±10 dB, 1 dB step
3)
INPUT SHORT (with sound field and equalizer
bypassed).
bypassed).
4)
Weighted network.
FM tuner section
Tuning range
Tuning range
87.5 – 108.0 MHz
Antenna
FM wire antenna
Antenna terminals
75 ohms, unbalanced
Intermediate frequency
10.7 MHz
AM tuner section
Tuning range
Tuning range
With 10-kHz tuning scale
530 – 1,710 kHz
5)
With 9-kHz tuning scale
531 – 1,710 kHz
5)
Antenna
Loop antenna
Intermediate frequency
450 kHz