Sony ICF-SW7600GR Manual

29

Using the timer

Hold down STANDBY MEMORY 

 or 

 selected in

Step 3 and press –?

K or k?+ repeatedly to set the

standby time.

The time changes by a minute each time –?

K or k?+ is pressed.

Hold down the button to rapidly change the digits.
When 

 or 

 is held down, STANDBY 

 or STANDBY 

 will

flash in the display.

Release STANDBY MEMORY 

 or 

.

”STANDBY 

” or ”STANDBY 

” lights

up and the standby setting is complete.
The clock indication returns to the current
time.

Display the time of the area you want the standby
function to take effect (LOCAL time or WORLD time).

When the time is reached and the standby function activates
The radio turns on, SLEEP indicator appears and the preset
station is received. The power will automatically turn off after
about 60 minutes.

To check the standby time
Hold down STANDBY MEMORY 

 or 

 with the radio turned

off. The preset standby time is displayed while the button is
pressed.

To change the standby time
Perform Step 4 and after and set the new time.

To cancel the standby function
Press STANDBY MEMORY 

 or 

 with the radio turned off so

that STANDBY 

 or STANDBY 

 is cleared from the display.

At this time, release button 

 or 

 within a second. Otherwise,

the unit goes to Step 5 for setting the standby time again.

Tips
• To temporarily cancel the standby function, turn off the radio and slide

HOLD in the direction of the arrow so that “-” is displayed. The
timer goes back to effect when “-” is cleared from the display (see
“Preventing operation errors – Hold function”, page 32).

• Once the standby presets are set, the radio turns on at the preset time

everyday unless the standby function is canceled by clearing
STANDBY 

 or STANDBY 

. Even when the standby function is

canceled, the station and time stored in STANDBY MEMORY 

 or 

are not erased until new settings are overwritten.

• If the standby memory is in standby status, it takes effect even when

you are listening to the radio. The radio switches to the preset standby
frequency at the standby time.

• You can set both STANDBY 

 and 

 to the standby status at the

same time. The radio turns on at the first standby time to receive the
first standby frequency, then switches to the second standby frequency
at the second standby time.

• If both STANDBY 

 and 

 are set to the same standby time, only

STANDBY 

 will operate.