Sony ICF-SW7600GR Manual
Listening to the radio
16
GB
Directly entering the
frequency
frequency
— Direct tuning
If you know the frequency of the station you want to listen to, you can
use the number buttons for quick and accurate tuning.
use the number buttons for quick and accurate tuning.
1
4
5
2
3
1
Press POWER ON/OFF to turn on the radio.
2
Press FM/AM to select either band.
To listen to SW (short wave), MW (medium wave) or LW (long
wave) broadcasts, select AM.
wave) broadcasts, select AM.
3
Press DIRECT.
The frequency disappears from the display.
Perform Step 4 within 10 seconds.
Otherwise, the unit will return to the
condition prior to Step 3. In this case, repeat
from Step 3. In addition, perform steps after
Step 4 within 10 seconds as well.
Perform Step 4 within 10 seconds.
Otherwise, the unit will return to the
condition prior to Step 3. In this case, repeat
from Step 3. In addition, perform steps after
Step 4 within 10 seconds as well.
4
Press the number buttons and input the frequency of
the desired station.
the desired station.
FM band: You can ignore the decimal point.
Example: To enter 89.5 MHz, press 8, 9 and 5.
AM band: You can ignore the last 3 digits if they are all zero.
Examples: To enter 810 kHz, press 8, 1 and 0.
To enter 10 000 kHz, enter 1 and 0.
To enter 12 095 kHz, enter 1, 2, 0, 9 and 5.
To enter 12 095 kHz, enter 1, 2, 0, 9 and 5.
The minimum frequency step for direct input is 0.05 MHz (50 kHz)
for FM and 1 kHz for AM.
for FM and 1 kHz for AM.
5
Press EXE.
The unit will tune in to the entered
frequency. “
frequency. “
TUNE
” will appear in the
display when the station is tuned in.
TVOLUME
(adjust the
volume)
volume)