Sony STR-DN1010 User Manual

D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB04GET_STR-DN1010-CEL.fm

STR-DN1010

4-174-068-11(1)

a)

To enjoy TV multi channel surround sound 
broadcasting from the speakers connected to the 
receiver, connect C or E.

 

Be sure to turn off the TV’s volume or activate the 
TV’s muting function.

b)

If your TV is compatible with the Audio Return 
Channel (ARC) function, the TV sound will output 
from the speakers connected to the receiver via 
HDMI TV OUT connection. In this case, set 
“ARC” to “ON” in HDMI Settings menu 

 

• Be sure to turn on the receiver when the video and 

audio signals of a playback component are being 
output to a TV via the receiver. If the power supply 
of the receiver is not turned on, neither video nor 
audio signals will be transmitted.

• Connect image display components such as a TV 

monitor or a projector to the HDMI TV OUT or 
MONITOR OUT jack on the receiver. You may 
not be able to record, even if you connect recording 
components.

• Depending on the status of the connection between 

the TV and the antenna (aerial), the image on the 
TV screen may be distorted. In this case, place the 
antenna (aerial) farther away from the receiver.

• When connecting optical digital cords, insert the 

plugs straight in until they click into place.

• Do not bend or tie optical digital cords.

• All the digital audio jacks are compatible with 

 

32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling 
frequencies.

• The receiver has a video conversion function. For 

details, see “Function for conversion of video 
signals” (page 34).

• When you connect the audio output jack of the TV 

to the TV IN jacks of the receiver to output the TV 
sound from the speakers connected to the receiver, 
set the sound output jack of the TV to “Fixed” if it 
can be switched between either “Fixed” or 
“Variable”.

The following illustration shows how to 
connect a Super Audio CD player, CD player, 
CD recorder and DIGITAL MEDIA PORT 
adapter. Before connecting cords, be sure to 
disconnect the AC power cord (mains lead).

• Do not connect or disconnect the DIGITAL 

MEDIA PORT adapter while the receiver is 
turned on.

• Be sure to make DMPORT connections 

firmly, insert the connector straight in.

• As the connector of the DIGITAL MEDIA 

PORT adapter is fragile, be sure to handle 
with care when placing or moving the 
receiver.

• When connecting the DIGITAL MEDIA 

PORT adapter, be sure the connector is 
inserted with the arrow mark facing towards 
the arrow mark on the DMPORT jack.

Press and hold both sides of the connector and 
then pull out the connector.